tel.: +7 (812) 334-43-19fax: +7 (812) 334-43-11

Equipment

To build complicated hydraulic structures, GT Morstroy uses various types of modern equipment.

Underwater and above-water installations (drilling rigs and floating self-propelled drilling pontoons).

Ground equipment (crawler and truck cranes, power packages).

Crawler caterpillar crane Liebherr LR 1130

Capacity – 137 tons

Boom length – 62 m

Track width – 1,000 mm

Track – 5.35 m

Weight – 138 tons

Crawler caterpillar crane Liebherr LR 1130

Crawler caterpillar crane Hitachi SCX 700

Capacity – 70 tons

Boom length – 41 m

Track width – 800 mm

Track – 2.44 (4.03) m

Weight – 65 tons

Crawler caterpillar crane Hitachi SCX 700

Automobile crane КС-45721

Maximum capacity – 25 tons

Telescopic boom length – 21.7 m

Maximum boom reach – 18 m

Hook height at maximum boom reach – 11 m

Track – 2.01 m

Vehicle chassis – Ural 4320

Turn radius – 11.6

Automobile crane КС-45721

Excavator Hitachi ZX 240 LCK with reinforced track assembly and working attachment

Bucket – 1 m3

Dig depth – 7.0 m max

Travel speed – 5.5 km/h max

Weight – 25.4 tons

Excavator Hitachi ZX 240 LCK with reinforced track assembly and working attachment

Hydraulic hammer Furukawa F22

Impact – 4,572 J

Pick diameter – 135 mm

Stroke frequency range – 360-700 cpm

Weight – 1,570 kg

Adapted to excavator Hitachi ZX 240 LCK

Hydraulic hammer Furukawa F22

Drilling rig Wirth PBA 818

Power – 273 kW

Drilling tool rotation speed – 0-120 rpm

Drilling diameter – 1-2.5 m

Penetration speed in rocky soil – 0.4 m/h

Drilling depth – up to 50 m

Maximum inclination of the well axis – 18 degrees (1:5)

Drilling rig Wirth PBA 818

Vibratory driver Muller MS-100 HHF

Centrifugal force, max 255 tf

Pulling force – 61 tons

Dead weight – 10.9 tons

Dynamic weight – 7.7 tons

Balance weight moment – 100-80-60-480 kgm

Vibration velocity, max 21.6 Hz

Vibratory driver Muller MS-100 HHF

Power unit Muller MS-A 660 V

Diesel engine output – 656 kW

Dead weight – 9.3 tons

Power unit Muller MS-A 660 V

Vibratory driver Mulller MS 50 H3

Centrifugal force, max 146 tf

Dead weight – 3.82 tons

Dynamic weight – 6.8 tons

Balance weight moment – 50 kgm

Vibration velocity, max 27 Hz

Vibratory driver Mulller MS 50 H3

Power unit Muller MS-A 420 V

Diesel engine output – 420 kW

Dead weight – 8.5 tons

Power unit Muller MS-A 420 V

Variable vibratory driver Muller MS 32 HFV

Centrifugal force, max 200 tf

Pulling force – 60 tons

Dead weight – 8.5 tons

Dynamic weight – 5.5 tons

Balance weight moment – 0-32 kgm

Vibration velocity, max 39.6 Hz

Variable vibratory driver Muller MS 32 HFV

Power unit Muller MS-A 675 V

Diesel engine output – 600 kW

Dead weight – 7.5 tons

Power unit Muller MS-A 675 V

Variable vibratory driver Muller MS 24 HFV

Centrifugal force, max 150 tf

Dead weight – 5 tons

Dynamic weight – 2.9 tons

Balance weight moment – 0-24 kgm

Vibration velocity, max 39.2 Hz

Variable vibratory driver Muller MS 24 HFV

Power unit Muller MS-A 420 V

Diesel engine output – 420 kW

Dead weight – 6.1 tons

Power unit Muller MS-A 420 V

Diesel hammer Delmag D 62-22, 2 units

Dead weight – 12.25 tons

Weight incl. sheeting cap – 17 tons

Weight incl. pipe drivehead – 26 tons

Weight of hammer tup – 6.2 tons

Blow energy – 224,600-109,800 nm

Stroke frequency range – 35-50 cpm

Diesel hammer Delmag D 62-22, 2 units

Saximeter

An electronic device that automatically determines the frequency and number of strokes, the piston height, with the driving report output.

Saximeter

Equipment

Diesel generator JCB G45QX, 33 kW – 1 unit

Diesel generator QIX-140, 104 kW – 1 unit

Diesel generator SDMO J165K, 120 kW – 1 unit

Diesel generator AKSA AJD 170, 122 kW – 1 unit

Diesel generator ET GP-200A/V, 160 kW – 1 unit

Welding rectifiers – 12 units

Compressor station XAHS-365, 21.5 m3/min – 1 unit

Pump stations, 10-1200 m3/h – 8 units

Plasma cutter Plasma Cut 70 – 1 unit

Diamond drilling rig CEDIMA – 1 unit

Equipment